Skip to main content

Hot Weather Concrete Construction Practices

Last time, we talked about the effects of hot weather on concrete curing. In this blog post, we’ll discuss several basic precautions that can reduce the damaging effects of hot weather on concrete:

  • Use mix designs that are less susceptible to the effects of hot weather. The use of low-heat-of-hydration cement and certain admixtures (such as hydration retarding and/or water-reducing admixtures) are two common approaches.
  • Keep concrete as cool as reasonably possible. ACI 305R does not state a maximum “as-placed” or “as-delivered” concrete temperature, but 90°F is commonly used. Substituting chilled water or shaved or chipped ice for a portion of the required mix water can help.
  • Schedule large concrete pours in the early morning or evening when temperatures are cooler.
  • Limit the amount of time between loading the concrete at the plant and placement / finishing at the site.
  • Limit water addition at the job site, except to adjust slump upon arrival (when permitted by mix design).
  • Avoid or limit hydration accelerating admixture use.
  • Use temporary wind screens and water misting nozzles to reduce surficial moisture loss.

Once concrete has been placed and finished, efforts must continue to protect the curing concrete. Initial curing is critical for concrete strength and quality. The most effective technique is moist curing - continuously wetting the surface. Moist curing is also effective in developing maximum concrete strength potential and reducing shrinkage cracking. While curing compounds are popular and may be effective, they must be sprayed on evenly and in sufficient quantity to be effective. Curing compounds are typically not used for indoor floors due to potential finished flooring adhesion compatibility issues.

Detailed planning for hot weather concrete is essential, so don’t wait for that hot spell before coming up with a strategy. A pre-placement meeting is recommended to clarify requirements that will address the wide range of possible actions and define responsibilities. The American Concrete Institute’s publication ACI 305R is also an excellent reference.

Add new comment

Plain text

By submitting this form, you accept the Mollom privacy policy.